Figure 86: Removing the Air Baffle and Cable Holder
What to do next
Removing the CPU Heatsink and CPU Module, on page 131
Removing the CPU Heatsink and CPU Module
Each of the server's CPUs have a heatsink that rests on top of the CPU. The heatsink is secured to the server
by six (6) captive Phillips heatsink screws, for a total of 12 screws in a dual CPU configuration.
The screws secure through the heatsink into the retention frame on the socket so that the CPU is secured into
the socket by the same set of screws.
Gather a #2 Phillips screwdriver before attempting this procedure.
Cisco UCS C885A M8 Server Installation and Service Guide
131
Recycling Server Components
Removing the CPU Heatsink and CPU Module
To Next Page
Loading...
