Figure 80: Removing the Left CEM Module
What to do next
Removing the CEM Crossbar, on page 124
Removing the CEM Crossbar
The CEM crossbar is a metal piece that spans the width of the server and provides support and attachment
points for the CEM Modules. The CEM Crossbar is secured to the server by 12 M3x L4mm Phillips screws.
Gather a #2 Phillips screwdriver before starting this procedure.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics for proper disposal to comply with local eco design and e-waste
regulations.
Warning
Procedure
Step 1 Locate the screws.
Cisco UCS C885A M8 Server Installation and Service Guide
124
Recycling Server Components
Removing the CEM Crossbar
To Next Page
Loading...
