Status DescriptionStatusFunctionItem
No Connection
Linked and Activity on
the Network
Off
Amber (Blinking)
NIC Link (Left)4
No Connection
Linked to 100Mbps
Network
Linked to 1G Network
Off
Amber
Green
NIC Link (Right)5
Display BIOS 80, 81 Port
Data After the Processor
Receives Sys_Power_On
Ready (Power On)
Display PFR Post Code
Data at LED 4 and 3 with
2 Dots On
Display FPGA Power Seq
and Error Codes or
BoardID at LED 2 and 1
and on Board LEDs
Solid On
Flashing
Seven-Segment LEDs (4
3 2 1)
6
2
Not Installed / Fault
Active
Failure; AC Cord
Unplugged / No AC
Power
Off
Green
Amber
12V Redundant Power
Supply (x2)
7
1. This LED is hardware and software controlled.
2. See POST Error Codes, on page 65 for a detailed description of seven-segment LED Codes.
Note
Component Locations
The server is designed as a modular system with subsystems for compute, cooling, and so on. Subsystems are
generally arranged in trays, which are field replaceable units (FRUs). However, some components in a
subsystem or tray are not individually field-replaceable. The following main components are not field
replaceable.
• Mainboard
• Power distribution board
• Mid-plane board
Cisco UCS C885A M8 Server Installation and Service Guide
13
Overview
Component Locations
To Next Page
Loading...
