Removing the PCIE12 Mini Cool Edge Cable
The server has multiple Mini Cool Edge cables, including the cable that connects to the PCIE12 connector.
This cable is not one of the 16 in top and bottom rows that connect to the HIB module. Instead, it connects
to the main motherboard.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics for proper disposal to comply with local eco design and e-waste
regulations.
Warning
Procedure
Step 1 Locate the cable.
Figure 78: Location of the PCIe12 Mini Cool Edge Cable
Step 2 Grasp the cable by the connector at one end and lift up to disconnect it.
Step 3 Grasp the cable by the other connector and lift up to disconnect it.
Step 4 When both ends of the cable are disconnected, release it from the B2 cable clip.
Cisco UCS C885A M8 Server Installation and Service Guide
121
Recycling Server Components
Removing the PCIE12 Mini Cool Edge Cable
To Next Page
Loading...
