Cisco UCS C885A M8 - Summary of Features

• For 12V CRPS 1+1
• If one PSU fails, troubleshoot the cause and replace the failing PSU immediately. System keeps
running at full performance. And healthy LED shows amber light.
• For 54V PSU 4+2
• If only 2 54V PSUs installed - the system can power on and running without GPU tray installed. //
This is only for system debug purpose.
• If only 3 54V PSUs installed - the whole system can operate but with performance reduced (power
capping every GPU to 60%).
• If >= 4 54V PSUs installed - the whole system can operate at full performance.
Summary of Features
Table 1: Summary of Features for Cisco UCS C885 H and M Model Servers
Cisco UCS 885A M8 M3X1 and
M3X2 Models
Cisco UCS 885A M8 H11, H12, H21,
H22 Models
Specification
AMD
®
Mi300xNVIDIA
®
H100/H200GPU
1536 GB (Total)640/1128 (Total)GPU Memory
Approximately12.5 kWApproximately 12.5kWSystem Power Consumption
Dual AMD
®
EPYC
™
9004 / 9005 Series Processors, PCIe Gen5CPU
Twenty four DDR5 RDIMM 96GB with 12 DIMMs attached to CPU0
and twelve DIMMs attached to CPU1.
System Memory
Eight HHHL PCIe AIC
Five FHHL PCIe AIC
Two OCP 3.0 SFF
Expansion Slot
One OCP 3.0 SFF PCIe Gen5 x8 NIC (CPU0) with two 10GbE RJ-45
Ethernet
LAN
Host baseboard management controller through DC-SCM with RJ45,
IPMI 2.0, KVM with Dedicated LAN, Watchdog
Management
OS: 2x 1.92TB NVMe M.2
Sixteen 2.5” 3.84TB NVMe U.2 SSD
Storage
Twelve 80105 Hot-swappable (N+1) For System Cooling
Four 6056 Fans For SSDs Cooling
System Cooling
Cisco UCS C885A M8 Server Installation and Service Guide
28
Overview
Summary of Features