Figure 146: Location of the Screws and Removing the SSD from the Carrier
Step 3 Recycle the SSD and carrier assembly in compliance with your local ewaste and recycling regulations.
Recycling Chassis PCBs
The server chassis contains the following PCBs:
• Power Distribution Board
• Mid-Pane Board
• Fan Extension Board
• FIO Board
As part of accessing these PCBs, you will need to teardown most of the chassis. You can use this procedure
for disassembling the main sheet metal chassis components.
To recycle the chassis PCBs, use these tasks in order
• Disassembling the Chassis, on page 169
• Recycling Chassis PCBs, on page 172
Disassembling the Chassis
Use this procedure to remove and recycle the chassis PCBs.
Cisco UCS C885A M8 Server Installation and Service Guide
169
Recycling Server Components
Recycling Chassis PCBs
To Next Page
Loading...
