Cisco UCS C885A M8 - Recycling the Main Board and SAS IO Board

Recycling the Main Board and SAS IO Board
The server's main motherboard and SAS I/) Board are connected to the server's sheet metal bottom by the
following fasteners:
• 21 M3x L6mm Phillips screws
• Two (2) 3x L5.5 mm Phillips thumb screws.
• Two (2) M3x L11.9 mm Phillips thumb screws
Gather a #2 Phillips screwdriver before starting this procedure.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics for proper disposal to comply with local eco design and e-waste
regulations.
Warning
Procedure
Step 1 Locate the screws.
Figure 89: Location of the Screws
FastenerIndicator
M3x L6mm screws (21)
Cyan Circle
Cisco UCS C885A M8 Server Installation and Service Guide
135
Recycling Server Components
Recycling the Main Board and SAS IO Board