Step 6 Grasp the built-in handles and lift the HGBB module from the tray.
Figure 94: Removing the HGBB Module
Step 7 Recycle the HGBB module and tray in accordance with local ewaste and recycling regulations.
Recycling the CPU Tray PCB
Use this task to detach the HGBB Tray's PCB for recycling.
The HGBB tray is heavy! Never attempt to lift or maneuver the tray by yourself! Instead, use a lift, scissors
jack, or some other device to lift and bear the weight of the HGBB tray while you are installing or servicing
it. If you must lift or handle the tray without mechanical assistance, use two or more people to lift and handle
server. Always use safe lifting practices when lifting or moving the HGBB tray.
Warning
Before you begin
If you have not already done so, remove power from the server.
For this procedure, gather a #2 Phillips screwdriver and a T20 Torx screwdriver (for heatsinks and CPUs).
An alcohol swab or CPU cleaning pad will be useful, but not required, to remove thermal grease between the
CPU and heatsink.
Procedure
Step 1 Remove the CPU Tray:
Cisco UCS C885A M8 Server Installation and Service Guide
140
Recycling Server Components
Recycling the CPU Tray PCB
To Next Page
Loading...
