Cisco UCS C885A M8 - Page 151

a) Loosen the two (2) thumbscrews.
b) Pull the tray handle to detach the CPU Tray from the main chassis assembly.
Figure 95: Removing the CPU Tray
Step 2 Replace the CPU Tray:
a) Insert the CPU Tray into the main chassis assembly.
b) Push back the tray handle until it latches into place.
c) Tighten the two (2) thumbscrews to secure the CPU Tray to the main chassis assembly.
Cisco UCS C885A M8 Server Installation and Service Guide
141
Recycling Server Components
Recycling Server Components