b) Detach the front cage assembly from the main chassis assembly.
Figure 150: Detaching the Front Panel
Step 4 Recycle the separated sheetmetal parts in compliance with your local regulations for ewaste and recycling.
What to do next
Continue disassembly. Go to Recycling Chassis PCBs, on page 172.
Recycling Chassis PCBs
Use this procedure to remove and recycle the chassis PCBs.
Before you begin
For this procedure, gather a #2 Phillips screwdriver.
Procedure
Step 1 If you have not already disassembled the main chassis assemblies, do so now.
Go to Disassembling the Chassis, on page 169.
Step 2 Continue disassembly by removing the Power Distribution Board.
a) Using a screwdriver, loosen the thumbscrew and remove the 6056 fan cage.
Cisco UCS C885A M8 Server Installation and Service Guide
172
Recycling Server Components
Recycling Chassis PCBs
To Next Page
Loading...
