Removing the PCIe Card
The server has eight (8) PCIe cards, each secured by one M3x L4mm Phillips screw, for a total of eight screws.
Gather a #2 Phillips screwdriver.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics for proper disposal to comply with local eco design and e-waste
regulations.
Warning
Procedure
Step 1 Using the screwdriver, remove the PCIe card's securing screw.
Step 2 Grasping the card by the handle, keep the card vertical while lifting straight up to disconnect it from its socket and remove
it from the chassis.
Figure 56: Removing the PCIe Cards
Step 3 Repeat this procedure, as needed, for each PCIe card that needs to be replaced.
What to do next
Removing the Mini Cool Edge Cables, on page 97
Cisco UCS C885A M8 Server Installation and Service Guide
96
Recycling Server Components
Removing the PCIe Card
To Next Page
Loading...
