Figure 82: Removing the CEM Crossbar
What to do next
Removing the PCIE11 and PCIE15 and PCIE16 Power Cable, on page 126
Removing the PCIE11 and PCIE15 and PCIE16 Power Cable
The server has multiple power cable, including a Y cable that connects at one end to the PCIE11 connector,
and connects the other ends to the PCIE15 and PCIE16 connectors.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics for proper disposal to comply with local eco design and e-waste
regulations.
Warning
Cisco UCS C885A M8 Server Installation and Service Guide
126
Recycling Server Components
Removing the PCIE11 and PCIE15 and PCIE16 Power Cable
To Next Page
Loading...
