EasyManua.ls Logo

Cisco UCS C885A M8 - Recycling Psus

Cisco UCS C885A M8
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 144: Detaching the Mainboard from the Bracket
Step 15 Recycle the Mainboard and all other recyclable parts and components in accordance with your local recycling and
ewaste regulations.
Recycling PSUs
The server supports two different types of power supplies (PSUs):
Six 54V 3000W (N+2) PSUs (All SKUs)
Two 12V 2700W (N+1) PSUs (EU SKUs)
PSUs are FRUs, which can be removed from the server for proper ewaste and recycling.
Procedure
Step 1 Remove the PSUs from the server chassis.
To remove the 54V PSUs, go to Removing and Replacing the 54V Redundant PSU, on page 56.
To remove the 12V PSUs, go to Removing and Replacing 12V Redundant PSU, on page 55
Step 2 When the PSUs are removed from the chassis, dispose of them in compliance with your local ewaste and recycling
regulations.
Cisco UCS C885A M8 Server Installation and Service Guide
167
Recycling Server Components
Recycling PSUs

Table of Contents

Related product manuals