Cisco UCS C885A M8 - Page 172

a) Using a Philips screwdriver or your fingers, loosen the thumbscrew.
b) Remove the Dual M.2 Module from the server.
Figure 134: Removing the Dual M.2 Module
c) (Optional) Using a Phillips screwdriver, loosen the screw.
Figure 135: Location of the Retaining Screw
d) Lift the SSD off of the Dual M.2 Module.
Cisco UCS C885A M8 Server Installation and Service Guide
162
Recycling Server Components
Recycling Server Components