• C885A-M8-H2SX-SLD
• C885A-M8-H1SX-SLD
• C885A-M8-B2AX-SLD
Cisco recommends replacing the tray with one that has the same PID.
Note
The HGBB tray is heavy! Never attempt to lift or maneuver the tray by yourself! Instead, use a lift, scissors
jack, or some other device to lift and bear the weight of the HGBB tray while you are installing or servicing
it. If you must lift or handle the tray without mechanical assistance, use two or more people to lift and handle
server. Always use safe lifting practices when lifting or moving the HGBB tray.
Warning
Use this task to replace the HGBB Tray.
Before you begin
To replace the HGBB Tray, gather a #2 Phillips screwdriver.
Procedure
Step 1 Remove the HGBB Tray:
a) Using the screwdriver, loosen the two thumbscrews.
b) Pull the tray handle to detach the HGBB Tray from the main chassis assembly.
Cisco UCS C885A M8 Server Installation and Service Guide
49
Maintaining the Server
Removing and Replacing HGBB Tray
To Next Page
Loading...
