Configuration | System | Events | Syslog Servers | Add or Modify
10-17
VPN 3000 Concentrator Series User Guide
Syslog Servers
The Syslog Servers list shows the UNIX syslog servers that have been configured as recipients of event
messages. You can configure a maximum of five syslog servers. If no syslog servers have been
configured, the list shows
--Empty--.
Add / Modify / Delete
To configure a new syslog server, click Add. See Configuration | System | Events | Syslog Servers | Add.
To modify a syslog server that has been configured, select the server from the list and click
Modify. See
Configuration | System | Events | Syslog Servers | Modify.
To remove a syslog server that has been configured, select the server from the list and click
Delete. There
is no confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the list.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the
Save Needed icon at the top of the Manager
window.
Configuration | System | Events | Syslog Servers | Add or Modify
These screens let you:
Add a UNIX syslog server as a recipient of event messages. You can configure a maximum of five
syslog servers.
Modify a configured UNIX syslog server that is a recipient of event messages.
Figure 10-9: Configuration | System | Events | Syslog Servers | Add or Modify screen
Syslog Server
Enter the IP address or hostname of the UNIX syslog server to receive event messages. (If you have
configured a DNS server, you can enter a hostname; otherwise, enter an IP address.)
To Next Page
Loading...
Need help?
General