16 Using the Command Line Interface
16-10
VPN 3000 Concentrator Series User Guide
1.1.3 Configuration > Interface Configuration > Configure Power Supplies
Model 3005 only Alarm Thresholds in centivolts (e.g. 361 = 3.61V)
Voltages will be adjusted to conform to the hardware.
1) Configure CPU voltage thresholds
2) Configure Power Supply voltage thresholds
3) Configure Board voltage thresholds
4) Back
Interfaces -> _
1.1.5 Configuration > Interface Configuration > Configure Expansion Cards
Model
3015–3080 only
Expansion Cards
-------------------------------------------
| 1. SEP | 2. Dual T1/E1 WAN |
-------------------------------------------
| 3. None | 4. None |
-------------------------------------------
1) Configure Slot #1
2) Configure Slot #2
3) Configure Slot #3
4) Configure Slot #4
5) Back
Interfaces -> _
1.1.4 Configuration > Interface Configuration > Configure Expansion Cards
Model 3005 only Expansion Card:
1) Configure Expansion Card
2) Back
Interfaces -> _
1.2 Configuration > System Management
1) Servers (Authentication, Accounting, etc.)
2) Address Management
3) Tunneling Protocols (PPTP, L2TP, etc.)
4) IP Routing (static routes, OSPF, etc.)
5) Management Protocols (Telnet, TFTP, FTP, etc.)
6) Event Configuration
7) General Config (system name, time, etc.)
8) Back
System -> _
To Next Page
Loading...
Need help?
General