15 Monitoring
15-46
VPN 3000 Concentrator Series User Guide
FTP = File Transfer Protocol.
HTTP = Hypertext Transfer Protocol (Web browser).
IPSec = Internet Protocol Security tunneling protocol (remote-access user).
IPSec/LAN-to-LAN = IPSec LAN-to-LAN connection.
IPSec/NAT = IPSec through NAT (Network Address Translation).
L2TP = Layer 2 Tunneling Protocol.
L2TP/IPSec = L2TP over IPSec.
Other = protocol other than those listed here.
PPTP = Point-to-Point Tunneling Protocol.
SNMP = Simple Network Management Protocol.
Telnet = terminal emulation protocol.
TFTP = Trivial File Transfer Protocol.
Encryption
The data encryption algorithm that the session is using.
None = no data encryption.
DES-40 = Data Encryption Standard algorithm with a 56-bit key, 40 bits of which are private.
DES-56 = DES encryption with a 56-bit key.
3DES-168 = Triple-DES encryption with a 168-bit key.
RC4-40 Stateless = RSA RC4 encryption with a 40-bit key, and with keys changed on every
packet.
RC4-40 Stateful = RSA RC4 encryption with a 40-bit key, and with keys changed after some
number of packets or whenever a packet is lost.
RC4-128 Stateless = RSA RC4 encryption with a 128-bit key, and with keys changed on every
packet.
RC4-128 Stateful = RSA RC4 encryption with a 128-bit key, and with keys changed after some
number of packets or whenever a packet is lost.
Login Time
The date and time that this session logged in: MM/DD/YYYY HH:MM:SS. Time is in 24-hour notation.
Avg. Throughput (bytes/sec)
The average throughput of the session, which is [total bytes transmitted and received] divided by total
connect time.
N/A = the session is not passing data; e.g., it is an administrator session.
To Next Page
Loading...
Need help?
General