4-1
VPN 3000 Concentrator Series User Guide
CHAPTER
4
System Configuration
System configuration means configuring parameters for system-wide functions in the VPN
Concentrator.
Configuration | System
This section of the Manager lets you configure parameters for VPN Concentrator system-wide functions.
•
Servers: identifying servers for authentication, accounting, DNS, DHCP, and NTP.
• Address Management: assigning addresses to clients as a tunnel is established.
• Tunneling Protocols: configuring PPTP, L2TP, IPSec LAN-to-LAN connections, and IKE proposals.
• IP Routing: configuring static routes, default gateways, OSPF, global DHCP, and redundancy (VRRP).
•
Management Protocols: configuring and enabling built-in servers for FTP, HTTP/HTTPS, TFTP,
Telnet, SNMP, and SSL.
•
Events: handling system events via logs, FTP backup, SNMP traps, syslog, SMTP, and email.
• General: identifying the system, and setting the time and date.
See the appropriate chapter in this manual or the online help for each section.
Figure 4-1: Configuration | System screen
End of Chapter
To Next Page
Loading...
Need help?
General