12 User Management
12-32
VPN 3000 Concentrator Series User Guide
Configuration | User Management | Groups | Modify (External)
This screen lets you change identity parameters for an external group that you have previously
configured. The screen title identifies the group you are modifying.
Figure 12-10: Configuration | User Management | Groups | Modify (External) screen
Group Name
Enter a unique name for this specific group. You can edit this field as desired. Maximum is 32 characters,
case-sensitive. Changing a group name automatically updates the group name for all users in the group.
See the note about configuring the RADIUS Class attribute under
Configuration | User Management | Groups
on page 12-16.
Password
Enter a unique password for this group. Minimum is 4, maximum is 32 characters, case-sensitive. The
field displays only asterisks.
Verify
Re-enter the group password to verify it. The field displays only asterisks.
Type
Click the drop-down menu button and select the authentication server type for the group:
Internal = To change this group to use the internal VPN Concentrator authentication server, select
this type. If you change this group from
External to Internal, the Manager displays the Configuration |
User Management | Groups | Modify (Internal)
screen when you click Apply, so you can configure all the
parameters.
External = To use only an external authentication server, such as RADIUS, keep this selection. The
external server supplies the group parameters if it can; otherwise the base-group parameters apply.
To Next Page
Loading...
Need help?
General