15 Monitoring
15-22
VPN 3000 Concentrator Series User Guide
Status
The functional state of this SEP module:
Operational = module is operating correctly.
Not Operational = module has failed during operation. This is an error condition; please contact
Cisco Customer Support.
Found = module is installed but is not yet operational. If this condition persists after the VPN
Concentrator finishes initializing, it is an error. Please contact Cisco Customer Support.
Not Found = module could not be found. This is an error condition; please contact Cisco
Customer Support.
Loading = the system is loading microcode into the SEP module.
Initializing = the system is initializing the SEP module.
Diagnostic Failure = module failed during diagnostic testing. This is an error condition;
please contact Cisco Customer Support.
DSP Code Version
The version of DSP (Digital Signal Processing) microcode running on this SEP module. This
information may be useful during troubleshooting.
Inbound Hash: Octets / Packets
The number of inbound authentication-only octets (bytes) / packets processed by this SEP. Only hashing
algorithms are applied to authentication-only traffic; there is no encryption or decryption.
Outbound Hash: Octets / Packets
The number of outbound authentication-only octets (bytes) / packets processed by this SEP.
Encrypted: Octets / Packets
The number of encryption-only octets (bytes) / packets processed by this SEP. Only encryption
algorithms are applied to encryption-only traffic; there is no hashing or authentication.
Decrypted: Octets / Packets
The number of decryption-only octets (bytes) / packets processed by this SEP.
Hash Encrypted: Packets
The number of packets that this SEP processed using both hashing (authentication) and encryption
algorithms. This is typical processing for tunneled traffic.
To Next Page
Loading...
Need help?
General