Administration | Access Rights | Administrators | Modify Properties
14-23
VPN 3000 Concentrator Series User Guide
Administrator
To assign “system administrator” privileges to one administrator, click the radio button. Only the
“system administrator” can access and configure properties in this section. You can select only one. By
default,
admin is selected.
Enabled
Check the box to enable, or clear the box to disable, an administrator. Only enabled administrators can
log in to, and use, the VPN Concentrator Manager. You must enable at least one administrator, and you
can enable all administrators. By default, only
admin is enabled.
Apply / Cancel
To save this screen’s settings in nonvolatile memory, click Apply. The settings immediately affect new
sessions. The Manager returns to the
Administration | Access Rights screen.
To discard your settings or changes, click
Cancel. The Manager returns to the Administration | Access
Rights
screen.
Administration | Access Rights | Administrators |
Modify Properties
This screen lets you modify the username, password, and rights for an administrator. Any changes affect
new sessions as soon as you click
Apply or Default.
Figure 14-23: Administration | Access Rights | Administrators | Modify Properties screen
To Next Page
Loading...
Need help?
General