11 General
11- 2
VPN 3000 Concentrator Series User Guide
Configuration | System | General | Identification
This screen lets you configure system identification parameters that are stored in the standard MIB-II
system object. Network management systems using SNMP can retrieve this object and identify the
system. Configuring this information is optional.
Figure 11-2: Configuration | System | General | Identification screen
System Name
Enter a system name that uniquely identifies this VPN Concentrator on your network; e.g., VPN01.
Maximum 255 characters.
Contact
Enter the name of the contact person who is responsible for this VPN Concentrator. Maximum 255
characters.
Location
Enter the location of this VPN Concentrator. Maximum 255 characters.
Apply / Cancel
To apply your system identification settings and include them in the active configuration, click Apply.
The Manager returns to the
Configuration | System | General screen.
Reminder: To save the active configuration and make it the boot configuration, click the
Save Needed icon at the
top of the Manager window.
To discard your settings, click
Cancel. The Manager returns to the Configuration | System | General screen.
To Next Page
Loading...
Need help?
General