Cisco VPN 3000 User Manual

Configuration | Interfaces | WAN Card in Slot N | Port A B as T1 or E1
3-19
VPN 3000 Concentrator Series User Guide
Inbound RIP
This parameter applies to RIP messages coming into the VPN Concentrator. It configures the system to
listen for RIP messages on this interface.
Click the drop-down menu button and select the inbound RIP function:
Disabled = No inbound RIP functions; i.e., the system does not listen for any RIP messages on this
interface (default).
RIPv1 Only = Listen for and interpret only RIPv1 messages on this interface.
RIPv2 Only = Listen for and interpret only RIPv2 messages on this interface.
RIPv2/v1 = Listen for and interpret either RIPv1 or RIPv2 messages on this interface.
Outbound RIP
This parameter applies to RIP messages going out of the VPN Concentrator; that is, it configures the
system to send RIP messages on this interface.
Click the drop-down menu button and select the outbound RIP function:
Disabled = No outbound RIP functions; i.e., the system does not send any RIP messages on this
interface (default).
RIPv1 Only = Send only RIPv1 messages on this interface.
RIPv2 Only = Send only RIPv2 messages on this interface.
RIPv2/v1 compatible = Send RIPv2 messages that are compatible with RIPv1 on this interface.

Cisco VPN 3000 Specifications

General

Brand	Cisco
Model	VPN 3000
Category	Switch
Language	English