Configuring the Wireless Network
Enabling Your Wireless Networks
Cisco Small Business WRV210 Administration Guide 42
3
- Share Key: A wireless client must provide the correct shared key in order
to access the wireless network.
• Default Transmit Key: To indicate which WEP key to use, select the
appropriate Default Transmit Key number.
• Encryption: Choose the level of WEP encryption, 64 bits (10 hex digits) or
128 bits (26 hex digits). Higher encryption levels offer higher levels of
security, but due to the complexity of the encryption, they may decrease
network performance.
• Passphrase: If you want to generate a key instead of entering a key
manually, type a passphrase in the field. You can enter up to 32 alphanumeric
characters. Then click Generate. A valid key appears in each of the Key 1 -
Key 4 fields.
• Key 1 - Key 4: If you did not use the Generate feature, enter a valid WEP key.
Do not leave a field blank, and do not enter all zeroes; they are not valid key
values.
- If you chose 64-bit WEP encryption, the key must be exactly 10
hexadecimal characters in length.
- If you chose 128-bit WEP encryption, the key must be exactly 26
hexadecimal characters in length. Valid hexadecimal characters are “0” to
“9” and “A” to “F”.
STEP 6 Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.
To Next Page
Loading...
Need help?
General
