Cleco CellTek S169263 - Counters Status; Maintenance Counter

Menus And Functions
44
P2544PM | 2022-12 | REV H
Apex Tool Group
5
EN
5.9.6 Counters status
>
Fig. 5-28: Submenu – Number of tightenings
Button
Description
Display of the number of all previous tightenings.
5.9.7 Maintenance Counter
Tool maintenance information helps to keep the tool in regular circulation for maintenance and service.
With this maintenance/service offering, common wear parts are maintained or replaced.
This button is only available if the maintenance counter was activated by Apex Tool Group.
>
Fig. 5-29: Submenu – Maintenance counter
Button
Description
Display of the number of rundowns under load.
Display of the number of rundowns until the next maintenance.
123
123