Climax FF6300 - Able A-2. Recommended Spare Parts

Page 108 FF6300 Operating Manual
Table A-2 lists items most frequently replaced due to wear, loss, or damage. Avoid
downtime by maintaining a small inventory of these critical parts.
TABLE A-2. RECOMMENDED SPARE PARTS
Qty P/N Description
FF6300 Main body assembly
6 79825 SEAL 125MM X 136MM X 4.2MM ROTARY (Rotary union seals)
2 15768 SEAL 1.625 ID X 2.250 OD X 0.313 (Worm drive seals)
2 79403 SEAL 148MM ID X 170MM OD X 15MM (Main spindle seals)
1 87329 VALVE 5 PORT ROLLER LEVER
FF6300 Turning arm
1 80534 HALFNUT 3/4-10 ACME LH (Radial slide leadnut)
4 10436 WASHER THRUST.500 ID X 0.937 OD X 0.060 (Leadscrew thrust washer)
2 10437 BRG THRUST 500 ID X 937 OD X 0.0781 (Leadscrew thrust bearing)
2 57320 O-RING 1/16 X 13/16 ID X 15/16 OD (Leadscrew thrust seals)
1 82333 HANDLE ADJUSTABLE M6 X 1 X 15MM
1 58133 HANDLE ADJUSTABLE M6 X 1 X 20MM
1 48526 NUT LEADSCREW ACME 3/4-10 BRONZE LH (Tool holder leadnut)
FF6300 Feed system
1 87326 ASSY FEED BOX PNEUMATIC MANUAL FEED ADJUST
120 in 50985 TUBING 1/4 OD X 040 WALL DOT 1200 PSI NYLON BLUE
120 in 59151 TUBING 1/8 OD X 023 WALL DOT 1000 PSI NYLON BLUE
1 58519 SHAFT FEED REMOVABLE FEEDBOX SHAFT
2 87842 CYLINDER AIR 40MM DIA 10MM STROKE DOUBLE ACTING
1 57530 BRG NEEDLE 1 ID X 1-5/16 OD X 0.625 OPEN
2 25957 BRG ROLLER CLUTCH 1 ID X 1.312 OD X 0.625 (KB)
2 25959 SEAL 1.000 ID X 1.312 OD X 0.125 (KB)
2 59156 SCREW M6 X 1.0 X 60MM SHCS
FF6300 ID chuck system
3 81980 SETUP FINGER 6300
8 82196 SCREW M8 X 1.25 X 40MM SHCS CAPTIVE (Setup finger screws)
1 81977 ASSY FOOT LEVELING FF6300
2 81973 LEG CHUCK 4 DIA X 2.25 THREADED
2 81974 LEG CHUCK 4 DIA X 4.5 THREADED
2 81975 LEG CHUCK 4 DIA X 9 THREADED