P/N 80679, Rev. 10 Page 11
FIGURE 1-4. WARNING LABEL PLACEMENT FF6300 PNEUMATIC CONDITIONING UNIT
1.9 ITEMS REQUIRED BUT NOT SUPPLIED
During setup, you will need the following items that are not included with the
product:
• Dial indicator
• Tape measure
• Rigging and lifting equipment as needed for machine setup
• Fittings required to connect to the pneumatic conditioning unit (PCU),
or the plug for the hydraulic power unit (HPU)
CLIMAX offers a dial indicator kit for purchase; contact CLIMAX for more
information.
To Next Page
Loading...
