P/N 80679, Rev. 10 Page 1
1 INTRODUCTION
IN THIS CHAPTER:
1.1 HOW TO USE THIS MANUAL - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
1.2 S
AFETY ALERTS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
1.3 G
ENERAL SAFETY PRECAUTIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
1.4 M
ACHINE-SPECIFIC SAFETY PRECAUTIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
1.5 R
ISK ASSESSMENT AND HAZARD MITIGATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
1.6 R
ISK ASSESSMENT CHECKLIST - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
1.7 L
ABELS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
1.8 L
ABEL LOCATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
1.9 I
TEMS REQUIRED BUT NOT SUPPLIED - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -11
1.1 HOW TO USE THIS MANUAL
This manual describes the setup, operation, maintenance, storage, shipping, and
decommissioning of the FF6300 Flange Facer Machine.
For maximum safety and performance, read this entire manual before
attempting to set up or operate the machine.
The first page of each chapter includes a list of the chapter contents to help you locate
specific information.
The appendices contain supplemental product information to aid in setup, operation,
and maintenance tasks.
1.2 SAFETY ALERTS
Pay careful attention to the safety alerts in this manual. Safety alerts call your attention
to dangerous situations that you may encounter when operating this machine. This
manual uses the following types of safety alerts:
1
indicates a dangerous situation that, if not avoided, WILL result in death or
serious injury.
1. For more information on safety alerts, see ANSI/NEMA Z535.6-2011, Product safety Infor-
mation in Product Manuals, Instructions, and Other Collateral Materials.
To Next Page
Loading...
