P/N 80679, Rev. 10 Page 13
2 OVERVIEW
IN THIS CHAPTER:
2.1 FEATURES AND COMPONENTS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13
2.1.1 ID
CHUCK ASSEMBLY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -15
2.1.2 ID
CHUCK ASSEMBLY DIMENSIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -16
2.1.3 OD
MOUNT ASSEMBLY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -17
2.1.4 OD
MOUNT ASSEMBLY DIMENSIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18
2.1.5 S
URFACE MOUNT ASSEMBLY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
2.1.6 S
URFACE MOUNT ASSEMBLY DIMENSIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
2.2 R
IGGING AND LIFTING INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -20
2.3 C
ONTROLS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21
2.3.1 P
NEUMATIC CONDITIONING UNIT CONTROLS - - - - - - - - - - - - - - - - - - - - - - - - - - -21
2.3.2 H
YDRAULIC POWER UNIT CONTROLS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21
2.4 M
ACHINE SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22
2.4.1 T
EMPERATURE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22
2.4.2 P
RESSURE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -23
2.4.3 R
OTATIONAL SPEED - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -23
2.4.4 F
EED RATE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -23
The FF6300 flange facing machine is designed for facing, beveling, and grooving
operations. All parts meet CLIMAX’s strict quality standards.
The FF6300 is highly configurable with a variety of options and accessories. The
machine you purchased may not have all of these. If you require additional accesso-
ries, please contact CLIMAX for assistance.
2.1 FEATURES AND COMPONENTS
High precision in a compact design – The FF6300’s precision rotating
assembly incorporates two large tapered roller bearings on a spindle. All fluid
rotary passages are located between these bearings to provide the maximum
machine rigidity in a compact package.
Operator safety – Do not touch moving parts during machine operation. A
pneumatic-powered reversible feed box controls both the radial and axial
feeds. The feed box is not remotely adjustable and should only be adjusted at
the feed box when the machine is not rotating. The feed rate is cam-controlled
to match the machine RPM. Manual feeding for rapid positioning is also possi-
ble.
Face to swing diameter – Because the feed box mounts to the inboard end of
the turning arm for facing, the machining diameter can exceed the swing diam-
eter.
Simple rigging – An abundance of lifting points are provided to simplify bal-
anced rigging for flanges in all orientations.
To Next Page
Loading...
