Page 14 FF6300 Operating Manual
Easy setup – The turning and counterweight arms are adjustable for the desired
swing clearance and machining range. The counterweight can be adjusted eas-
ily to achieve near-perfect rotational balance.
Ability to machine grooves and bevels – The swivel tool head rotates 360
o
and has a tool holder that rotates 360
o
independently. It accepts up to .75"
(19mm) square shank tools.
Smooth high-torque machining – The low-backlash cone worm gear drive
allows smooth high-torque machining even during interrupted cuts.
Rigid chucking – The tubular chucking system with level-in-place adjusting
feet allows for quick setup.
Modular design – Many of the machine components can be removed to make
setup and storage easier. For example, you can set up the chuck independently
and then add the main rotary housing.
Mounting options – With the optional CLIMAX OD mount kit, the machine
can be mounted to the outside diameter of the flange, without welding. With
the CLIMAX surface mounting kit, the machine can be face mounted.
Multiple drive choices – Hydraulic and pneumatic drives are available.
Machining accessories available – CLIMAX offers a backfacing attachment
for tube sheet flanges. The main body has an extra rotary union port where you
can add your own pneumatic-powered live tooling for grinding or other opera-
tions.
To Next Page
Loading...
