Copyright © 2014 congatec AG IGX1m02 106/134
21.1 Boot Conguration
21.1.1 Bootup NumLock State
The setting of the NumLock function after a system boot is provided here. NumLock
controls the functionality of the numeric keypad.
On
NumLock is enabled, the numeric keypad can be used.
Off NumLock is disabled, the numeric keypad keys can be used to control the cursor.
The Num indicator light on your keyboard shows the current boot up NumLock state.
The
Num
key on the keyboard can be used to toggle
between ON and OFF.
21.1.2 Quiet Boot
The boot logo is shown on the screen instead of the POST boot up information.
Enabled The boot logo is displayed.
Disabled
The POST boot up information is shown on the screen.
To Next Page
Loading...