Congatec conga-IGX - SATA and mSATA Configuration; Current TPM Status Information; SATA Mode Selection; mSATA Module Support

Copyright © 2014 congatec AG IGX1m02 74/134
17.1.4 Current TPM Status Information
Shows the current TPM (Trusted Platform Module) status.
• TPM SUPPORT OFF Is displayed if the TPM Support is disabled.
• TPM Enabled Status Indicates whether TPM can be used.
• TPM Active Status Indicates whether TPM is enabled.
• TPM Owner Status Indicates the TPM owner status.
17.2 SATA Conguration
Opens the SATA conguration submenu.
17.2.1 SATA Mode
Species in which mode the SATA ports will be operated.
IDE
The SATA port is operated in IDE Mode.
AHCI
The SATA port is operated in AHCI Mode.
RAID (if available)
The SATA port is operated in RAID Mode.
17.2.2 mSATA Support
Determines whether mSATA modules are detected automatically.
Auto
If the mSATA module has an mSATA Present Pin, the module is detected automatically.
Enabled
The mSATA interface is always active.