Contex FLEX50i - Page 3

5.3.9 The Advanced option 5-15
5.4 Using Copy Software with the scanner (local or network PC) 5-16
6. How do I Scan to File? 6-1
6.1 Scan to Local or Network PC with the iJET Panel 6-2
6.2 Scan-to-File Menu Options – iJET Panel 6-4
6.2.1 Enter the iJET Panel Scan-to-File Menu 6-4
6.2.2 Set the Scan Mode 6-4
6.2.3 Set the Scan Mode Parameters – Level or Gamma 6-6
6.2.4 Set the Scan-to-File Resolution 6-7
6.2.5 Set the Scan-to-File Size (input size) 6-8
6.2.6 Set the File Format ( TIFF, JPEG, PDF ) 6-9
6.2.7 Set the File Format Quality 6-10
6.2.8 Using Scan Software – From Local PC or Network PC 6-11
7. Using the Web Access Interface – Setup, Monitor, Scan 7-1
8. Maintenance 8-1
8.1 Preliminary Maintenance – during scanner installation 8-1
8.2 Regular Scanner Maintenance 8-1
8.3 Cleaning the Scan Area 8-2
8.4 Running the Scanner Maintenance Program 8-6
8.4.1 Starting Scanner Maintenance from a PC on the LAN 8-6
8.4.2 Starting Scanner Maintenance from a Local PC 8-6
8.4.3 Running Scanner Maintenance - Steps 8-7
8.5 Replacing Scanner Parts 8-8
8.5.1 Replacing the Glass-plate 8-8
8.5.2 Replacing the White-Background 8-12
8.5.3 Replacing the Scanner Lamp-Unit 8-18
8.5.4 Replacing the Dust-Filters 8-25
8.6 Locate / Insert the Smart Card 8-28
8.7 Downloading New Firmware 8-30
8.7.1 Setting the Scanner in Firmware BOOT Mode 8-32
9. Appendix A: Important Safety Instructions 9-1
10. Appendix B: Regulations 10-1
11. Appendix C: iJET Panel Quick Reference Guide 11-2
11.1 iJET Panel Buttons Overview 11-4
11.2 Option Description Tables 11-6
11.2.1 Menu Button - Copy Settings 11-6
11.2.2 Menu Button – Advanced Settings – System Setup 11-9
11.2.3 Scan-to Button – Scan-to-file Settings 11-15
11.3 The complete iJET Panel Menu diagram 11-17