Using the scanner, how do I … Copy? 5-9
2. Use the arrow up/down buttons
to move through the Menu options until the display shows Org.
Type-B&W as shown below.
3. Press
to move the “>” marker down to indicate you want to change the Org. Type-B&W
value.
4. Press the arrow up/down buttons
to change the Org. Type-B&W value that matches the
original and copy job. The display shown below is set for Line originals (documents with line drawings
and text).
5. Press the
button to accept the selected value. The “>” marker will move up to the Menu level
indicating that the value is set and you can step on through the menu options if needed. The new
Org. Type-B&W value will be applied every time you press the B&W Copy button until you repeat the
steps above to change it.
5.3.3 How do I… apply the Sharpen filter?
You can give your copy sharper lines with the Sharpen option. The Sharpen filter identifies edges in the
image and intensifies them. You can use the Sharpen option with both Color Copying and B&W Copying
and with all original types. When set to ON, the option will apply the Sharpen filter when you press either
the Color Copy or B&W Copy button.
To apply the Sharpen filter
On the iJET Panel –
1. Press the button to enter the main Menu.
2. Use the arrow up/down buttons
to move through the Menu options until the display shows
Sharpen as shown below.
3. Press
to move the “>” marker down to indicate you want to change the Sharpen setting.
4. Press the arrow up
or arrow down button
to change the Sharpen setting
5. Press the
button to accept the selected setting. The “>” marker will move up to the Menu
B&W
The “>” marker is down to the value level so you can
Sharpen
> OFF
> Sharpen
OFF
Org. Type-B&W
> Line
The ”>” marker is on the Menu level
navigating the menu options with the arrow up/down
Line
The “>” marker is down to the value level s
To Next Page
Loading...
