Contex FLEX50i - How Do I

Using the scanner, how do I … Copy? 5-13
5.3.7 How do I… Mirror the Image?
You can mirror the image during capture.
The option’s setting will be applied when you press either the Color Copy or B&W Copy button.
To Mirror the image:
On the iJET Panel –
1. Press the button to enter the main Menu.
2. Use the arrow up/down buttons to move through the Menu options until the display shows
Mirror as shown below.
3. Press
Enter
to move the “>” marker down to indicate you want to change the Mirror option setting.
4. Press the arrow up or arrow down button to change the Mirror option value to YES or to NO.
YES will mirror the original image in your copy and NO will leave it as it is.
5. Press the
Enter
button to accept the selected setting. The “>” marker will move up to the Menu
level indicating that the value is set and you can step on through the menu options if needed. The
new Mirror setting will be applied every time you press the Color Copy or the B&W Copy button until
you repeat the steps above to change it.
B&W
Copy
Color
Copy
Mirror
> YES
The ”>” marker is on the Menu level
. You can continue
navigating the menu options with the arrow up/down
buttons.
> Mirror
YES
Menu
The “>” marker is down to
the value level so you can
change the setting.
Mirror
> NO
> Mirror
NO