Using the scanner, how do I … Scan to File? 6-3
7. Press the arrow up/down buttons
to move through the options in the Scan-to-File Menu. Press
to move the “>” marker down so you can change the current option’s value.
8. The Scan-to-File Menu will take you through different options. Each option must be confirmed by
pressing the Enter
button. The Scan-to-File Menu and its options are described in the
next section.
9. Your new scan-to-file settings will be tied to and stored with the target PC name you selected in step
3 and they will be recalled next time you select the same target PC from the iJET Panel.
10. When you have finished making your settings, press the Scan button to send your scan to the target
PC.
Scan
When you press
down indicating you can change the option value.
Scan Mode
> 24-bit Color
Entry into the Scan-to-File Menu
> Scan Mode
24-bit Color
To Next Page
Loading...
