Maintenance Manual SP 40
Rev. 005
i.2 Index
TABLE OF CONTENTS cont’d
Page
Chapter 3 Operability and Configuration
3.1 Overview 49
3.2 Operability 49
3.2.1 Operator Panel 49
3.2.2 Function keys 50
3.2.3 Leds 50
3.3 Printer Set-up Mode by Operator Panel 51
3.3.1 Print of Self Test Page 52
3.3.2 Printer Configuration 53
3.3.2.1 Print of the Setup Forms 53
3.3.2.2 Filling in the Printer Setup Forms 54
3.3.2.3 Reading the Preprinted Forms 54
3.3.2.4 Setup Forms and Parameters 55
3.3.2.5 Offset Adjustments 61
3.4 Printer Set-Up Mode by Web Browser (NIC card) 63
3.5 Printer Set-Up Mode through the application SP40setup (via serial i/F) 68
3.5.1 Entering the printer Setup Mode 68
3.5.2 Install the SP40setup application 68
3.5.3 Run the SP40setup application 70
3.5.4 How to download to SP40 an existing configuration file 73
3.6 Print of NIC Configuration Page 74
Chapter 4 Service Maintenance
4.1 Overview 75
4.2 Initial Inspection and tools 75
4.3 Set-up 75
4.4 Cleaning 75
4.5 Lubrication 76
4.6 Paper Specifications 76
4.7 Consumables 76
4.8 Software Update 77
4.8.1 Basic Software update through parallel or serial interface 77
4.8.2 NIC Software update through parallel or serial interface 78
4.8.3 LAN Parameters Setup through parallel interface 79
4.8.4 Software update through LAN interface 80
4.8.4.1 Software update through LAN using FTP 80
4.9 Troubleshooting 81
4.9.1 Hexadecimal Dump 81
4.9.2 Printer Errors 81
4.9.2.1 Recoverable errors 81
4.9.2.2 Unrecoverable errors 82
4.10 Troubleshooting Tables 84
4.10.1 Power malfunction 84
4.10.2 Faulty probability guide 85
4.11 Reset the Consumable Parts 86