Crow PowerWave-64 - Page 72

Page 72
3 = Key-switch ARM's/STAY
4 = Pendant chirps when armed
5 = Pendant chirps when in Stay Mode
6 = 2 sec pulse at set
7 = 2 sec pulse at unset
8 = Spare
P732E PARTITION "C" TIME AND DELAY OPTIONS - Default 0 Page 27
1 = set partition When Time Zone Ends
2 = Unset Partition When Time Zone Starts
3 = Disable Stay Mode Exit Delay
4 = Disable Set Mode Exit Delay
5 = Disable Stay Mode Entry Delay
6 = Disable Set Mode Entry Delay
7 = Use special Stay Mode entry timer
8 = Report Stay Mode alarms & Bypasses via dialler
Enabling Local PA Message Options
P733E 1 = Enable PA Disarm msg -Default = 0 Page 27
2 = Use Canned PA Disarm msg
3 = Repeat PA Disarm msg
4 = Spare
5 = Enable PA Armed msg
6 = Use Canned PA Armed msg
7 = Repeat PA Armed msg
8 = Spare
P734E 1 = Enable PA Stay Armed msg -Default = 0 Page 28
2 = Use Canned PA Stay Armed msg
3 = Repeat Stay PA Armed msg
4 = Spare
5 = Spare
6 = Spare
7 = Spare
8 = Spare
** Dialler Reporting Options for partition “C” **
P735E Area C reporting options -Default = 1,2 Page 29
1 = Send arm / disarm 5 = Send arm when exit delay expires (LED On)
2 = Send Stay Mode arm/disarm 6 = Send all zone restores at disarm only
3 = Send disarm only after activation's 7 = Spare
4 = Send Stay Mode disarm only after alarm 8 = Spare
** Area “C” Contact ID Account Code **
P736E Account number for Area "C" - default 0000 Page 29
**Area “C” Arm/Disarm Reporting Scenario **
P737E Area C Arm/Disarm reports mapped to scenario 1-4 default 1 Page 29
**Area “C” Child Disarm Reporting Scenario **
P738E Area C Child Disarm Reporting scenario 1-4 default 1 Page 30
** Command Control Options **
P741E Command code for Area “A” control Page 43
P742E Command code for Area "B" control Page 43
P743E Command code for Area "C" control Page 43
P744E Command code for Area "D" control Page 43
P745E Command code for output control Page 43
P746E Command code to turn “MICROPHONE” On Page 43
**Keypad Panic Alarm Contact ID Reporting Code**
P747E Keypad Panic Alarm (& button 1 & 3) Contact ID Code (Default=120) Page 53
**Keypad Fire Alarm Contact ID Reporting Code**