DGS-3100 Series Gigabit Stackable Managed Switch User Manual
220
Field Description
1=check).
For example, to set 2002:0:0:0:0:0:bfd4:0, use mask 128
2. Select Source IP Mask and/or Destination IP Mask. The Mask Generate button is active.
3. Enter an IP mask in the box adjacent to the Mask Gener
ate button.
4. Alternatively, click
.
The Generate Mask by range fields appear.
5. Enter an IP address range into the Gener
ate Mask by range fields, and click . The mask is generated.
6. Click
. The ACL profile is added, and the device is updated.
To define L3 IPv6 ICMP ACL profile:
1. Click th
e ICMP button. The ACL Profile L3 IPv4 ACL ICMP Page updates to show the following:
Figure 0-19 ACL Profile L3 IPv6 ACL ICMP Page
The ACL Profile L3 IPv4 ACL ICMP Page contains the following fields:
Field Description
ICMP Type
Sets the ICMP Type field as an essential field to match.
ICMP Code
Sets the ICMP code field as an essential field to match.
2. Select the ICMP Type and/or ICMP Code fields.
3. Click
. The ACL profile is added, and the device is updated.
TCP Filtering
If L3 IPv6 ACL TCP is selected, the page updates as follows:
To Next Page
Loading...
