Need help?Do you have a question about the D-Link xStack DGS-3426 and is the answer not in the manual?
General| Type | Managed |
|---|---|
| Uplink Ports | 2 x 10-Gigabit SFP+ |
| VLAN Support | Yes |
| MAC Address Table Size | 16K |
| RAM | 128 MB |
| Flash Memory | 16 MB |
| Jumbo Frame Support | Yes |
| Ports | 24 x 10/100/1000BASE-T |
| Power Supply | Internal |
| Dimensions | 440 x 250 x 44 mm (17.3 x 9.8 x 1.7 inches) |
| Layer | Layer 2 |
| Power Consumption | 30W |
| Weight | 3.6 kg (7.9 lbs) |
Outlines the available methods for managing the switch: Web-based, SNMP, and Console.
Details the steps and requirements for connecting to the switch via the RS-232 console port for configuration.
Explains how to assign an IP address to the switch for network communication and management.
Guides users on how to access the switch's management interface through a web browser.
Explains Virtual LANs, their benefits, and how they segment the network.
Covers port-based and MAC-based access control using the IEEE 802.1x standard.
To Next Page
