DAELIM B-BONE

DRIVE BELT
REMOVAL
● Remove the LH. crankcase cover.
● Loosen the drive face setting flange nut 12mm using
the drive face holder and remove the drive face.
TOOL : DRIVE FACE HOLDER
8-3
LH.CRANK CASE COVER/CONTINUOUSLY VARIABLE TRANSMISSION
● Loosen the clutch outer setting nut using the universal
holder.
TOOL : UNIVERSAL HOLDER
● Enlarge the driven pulley belt groove with the drive
belt in place as photo.
● Remove the driven pulley sub assembly with the drive
belt in place.
● Remove the drive belt from the driven pulley sub ass’y.
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVE FACE HOLDER
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVE BELT
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
DRIVEN PULLEY
Squeeze the drive belt into the pulley groove as
shown so that it slackens enough to remove the
driven pulley from the drive shaft.
!
CAUTION