Dahua DH-PFS6428-24T - Show Interface; LACP Status; LACP State

1.4.1 show interface
Command Description
This command is used to display the packet statistics of one or more
ports.
Parameter
<cr>
It is used to display data statistics of all ports.
G<1-24>
It is used to display data statistics
Default
None
Command Mode
Privileged mode
Example
switch# show interface G1
1.5 LACP status
Function Brief
This function module is used to display the LACP port configurations.
1.5.1 lacp state
Command Description
This command is used to display the status of the LACP system.
Parameter
None
Default
None
Command Mode