Dahua DH-PFS6428-24T - SNTP Auto-Sync Timer; SNTP Connect; SNTP Timezone Set

2.3.3 sntp auto-sync timer
Command Description
This command is used to set the SNTP synchronization time
interval.
Parameter
sntp auto-sync timer time,time Values range 5-65535s, 300s default
value.
Default
300s
Command Mode
Global configuration mode
Example
Switch(config)#sntp auto-sync timer 5
2.3.4 sntp connect
Command Description
sntp connect A.B.C.D
//This command is used to select the SNTP server to connect.
Parameter
None
Default
None
Command Mode
Global configuration mode
Example
switch(config)#sntp connect 210.21.196.6
2.3.5 sntp timezone set
Command Description
switch(config)# sntp timezone set<0-39>
//This command is used to select the time zone.
Parameter
<0-39>
Each number represents a time zone, can use SNTP
timezone show view the corresponding relationship