5.3 OSPF config
OSPF configuration commands include:
router OSPF
network address wildmask area area-ID
router-id A.B.C.D
timers throttle spf
default-metric
passive-interface
redistribute rip|static|connected
default-information originate
ip ospf
Show ip ospf
Function Brief
OSPF is a link state routing protocol that uses bandwidth based
metrics.OSPF uses the SPF algorithm to calculate the route,no routing loop is
guaranteed from the algorithm,maintain route through neighbor relationship,Avoid
periodic updates on bandwidth consumption.OSPF routing update rate is high, and
the network convergence is fast,it is Suitable for large and medium sized networks.
5.3.1 router ospf
Command Description
router ospf
no router ospf
Parameter
None
Default
None
Command Mode
Global configuration mode
Example
switch(config)#Router OSPF
//This command is enable the OSPF.
To Next Page
Loading...
Need help?
General