Dahua DH-PFS6428-24T User Manual

6.10.2 ip source-guard trust
Command Description
ip source-guard trust<0/1/2/3>
no ip ip source-guard trust
Parameter
Parameter
Parameters of the command mode
0/1/2/3
It specifies the number of dynamic
clients. The value ranges from 0 to 2.
Default
Unlimited
Command Mode
Interface configuration mode
Example
switch(config)# interface G1
switch(config-G1)#ip source-guard trust 1
6.10.3 ip dhcp-snooping binding
Command Description
ip dhcp-snooping binding <MAC> vlan <VLANID> ip <A.B.C.D> mask
<Msak> interface < IFNAME>
no ip dhcp-snooping binding <MAC> vlan <VLANID> ip <A.B.C.D>
interface < IFNAME>
Parameter
Parameter
Parameters of the command
mode
MAC
the MAC address of Static
binding
VLANID
the VLAN ID of Static binding
A.B.C.D
the IP address of Static binding
Msak
the mask address of Static
binding
IFNAME
port number
Default
Unlimited
Command Mode
Interface configuration mode
Example
switch(config)#ip dhcp-snooping binding 40-50-11-11-11-11 vlan 1

Dahua DH-PFS6428-24T Specifications

General

Brand	Dahua
Model	DH-PFS6428-24T
Category	Switch
Language	English