Dahua DH-PFS6428-24T User Manual

switch(config-vlanif2)# ip ospf authentication message-digest
switch(config-vlanif2)# ip ospf authentication-key abc
5.3.10 show ip ospf
Command Description
//This command is used to display the OSPF
show ip ospf border-routers/database/interface/neighbor/route
Parameter
border-routers
Boundary router, which is used
to display the border router.
database
Link state database, view
OSPF link state database
interface
Display interface OSPF
information
neighbor
Neighbor: view OSPF neighbor
table
route
Route: view OSPF route
Default
None
Command Mode
Privileged mode
Example
//This command is to display the border-routers.
switch# show ip ospf border-routers
//This command is to display the database.
switch# show ip ospf database
//This command is to display OSPF interface information.
switch# show ip ospf interface vlanif1
//This command is to display the neighbor.
switch# show ip ospf neighbor
//This command is to display the OSPF route.
switch# show ip ospf route
5.3.11 example
Network diagram as shown in Figure:

Dahua DH-PFS6428-24T Specifications

General

Brand	Dahua
Model	DH-PFS6428-24T
Category	Switch
Language	English