Dahua DH-PFS6428-24T - IP DHCP-Snooping Trust; Show IP DHCP-Snooping Lease

//This command is used to disable the DHCP snooping configuration mode.
Parameter
None
Default
Disable
Command Mode
Global configuration mode
Example
None
4.9.2 ip dhcp-snooping trust
Command Description
ip dhcp-snooping trust:
//This command is used to configure the DHCP snooping trust mode.
no ip dhcp-snooping trust:
//This command is used to configure the DHCP snooping non-trust mode.
Parameter
None
Default
Non-Trust
Command Mode
Interface configuration mode
Example
//This command is to set port 1 model for trust.
switch(config)#interface G1
switch(config-G1)# ip dhcp-snooping trust
4.9.3 show ip dhcp-snooping lease
Command Description
show ip dhcp-snooping interface:
//This command is used to display the DHCP snooping trust mode of a port.
Parameter
None
Default
None
Command Mode