2. System Setting Commands
2.1 IP config
IP address configuration commands include:
ip address
ip address dhcp
ip address old_ip A.B.C.D/M new_ip A.B.C.D/M
show ip interface
notice:A.B.C.D/M,Example:192.168.1.1/24
Function Brief
The IP configuration module is used to add, delete or display the
interface IP information of a switch.
2.1.1 ip address
Command Description
Configure IP port for A.B.C.D/M
no ip address A.B.C.D/M
//Delete ports IP A.B.C.D/M
Parameter
None
Default
VLAN 1 interface
Command Mode
VLAN interface configuration mode
Example
switch(config)# interface vlanif1
switch(config-vlanif1)#ip address 192.168.100.1/24
switch(config-vlanif1)#no ip address 192.168.100.1/24
2.1.2 ip address dhcp
Command Description
Configure IP port for automatic access (network DHCP server will
assign a dynamic IP) for the switch port.
no ip address dhcp
To Next Page
Loading...
Need help?
General