Dahua DH-PFS6428-24T - System Status Commands; Mode Description

1. System Status Commands
1.1 Mode Description
Command Description
How to enter and exit each mode (the privilege mode, global mode,
and interface mode)
Parameter
None
Default
None
Command Mode
Privileged mode
Example
username: admin
password: admin（Hidden）
switch#
switch# exit
press ENTER to get started
username:
// This command is used to enter the privileged mode, and the exit
command is used to exit the privileged mode.
switch# configure terminal
switch(config)# exit
switch#
// This command is used to enter the global mode, and the exit command is
used to exit the global mode and return to the privileged mode.
switch# configure terminal
switch(config)# interface G1
switch(config-G1)# exit
switch(config)#
// This command is used to enter the G1 interface mode from the global
mode, and the exit command is used to exit the interface mode.
switch(config)# interface vlan1
switch(config-vlanif1)# exit
switch(config)#